Flysurfer Flyboards | Flysplit M 134 x 41 | Split Kiteboard | Canada | USA
SIZES
134cm x 41cm
SPLIT SYSTEM
The Split-System makes the FlySplits to the first separable kiteboards that do not compromise in performance.
EASY TO ASSEMBLE
It only takes a few seconds to easily and quickly assemble a FlySplit. Through the zigzag construction both board parts join and are fixed by two metal splints. From the car onto the water in only a in a twinkling .
SPACE SAVING
No more checking in sports luggage and paying extra fees when you travel. The FlySplit M fits in your normal travel bag (common bag size: 75x52x31cm). For the FlySplit „L“ please compare the pack size of the board with the internal dimensions of your suit case prior to your flight.
LIGHT WEIGHT
With their low weight of 2.65kg for the FlySplit M the FlySplit belong to the lightest kiteboards on the market. No extra luggage and better riding characteristics guaranteed.
WOOD-FOAM CORE
All FlySplits have a hybrid core, aimed at achieving a maximum harmony of board weight, performance and durability. A foam core comes into use on the toe side in the longitudinal direction, providing a significant reduction in weight. On the side with more load, the heel side, a robust wood core is used, guaranteeing breaking stability and the dynamic recovery force of the board.
TORSION FIBRE LAYERS
The innovative assembly of a unidirectional woven layer lengthwise and an additional woven layer (torsion layer) at a 45-degree-angle achieves considerably higher torsion stiffness, which is reflected in increased jumping performance with nevertheless good comfort.
SCRATCH PROOF TOPSHEET
All of our boards have a special high-quality UV and scratch-resistant coating, and thus offer a long product life. The graphic design is protected under the coating, so that it does not get damaged if the board is slightly scratched.
TUCKED UNDER EDGE RAILS
The „Tucked-Under“ Edge has been cut off at a 45 degree-angle, as surfboards have been manufactured traditionally. This makes the board very controllable, even in choppy conditions and reduces spray.
WIDER STANCE
Wider insert positions make it easier to land. There are three different stance options possible - Small (50.4 cm), Normal (56.2 cm) and Wide (61.2 cm).
CENTRE-FIN
The FlySplit L has a 8cm long centre-fin on the heel-side. The centre fin increases the upwind performance especially in lightwind.
ERONOMIC TOESIDE
The asymmetrical rounder and shorter toe-side outline increases control when riding toe-side and provides increased maneuverability while carving.
MADE IN EU
Thanks to our manufacturing process within Europe we can guarantee highest quality and the usage of only the best materials.
Innovation has always been one of Flysurfer’s highest aspirations when it comes to product development. This self-set aim motivates the development team surrounding Andi Hanrieder every day to create new ideas. One of these truly innovative products is the new boardline, FlySplit. The all new FlySplit combines the opportunity to dissemble the board in the middle with the performance of a normal kiteboard. This is the crucial feature that wins extra space when traveling, whilst maintaining that the kiteboard performs just as well as a Radical or Flydoor.
Save when traveling
Especially helpful in these times of ever increasing excess baggage fees, charged by airlines on route to your favorite kite destinations, the FlySplit gives you the opportunity to dissemble your kiteboard easily and quickly so that it fits into your travel-bag.
This innovation ensures that you won’t ever have to wait the extra minutes -or hours- at the beginning and end of your journey with check in and collection of your sporting luggage. The benefits are not exclusive to air-travel, when reaching your kite spot in a smaller car, or even in a sports car, the FlySplit offers you great flexibility. You might also take the chance to give your friend a lift to the spot, something which would otherwise be near impossible.
Precise manufacture of a high quality construction
To meet the high demands on this product, we’ve invested three years of intense testing and developing the FlySplit to create a kiteboard which is more than just a separable kiteboard.
Thanks to our manufacturing in Europe we can guarantee that the FlySplits are produced with the best resources. By using only the best material, we achieve riding characteristics which combine both comfort and high performance. The splitting construction is impressively simple. The zigzag construction joins easily together and needs only to be fixed with a metal splint on both sides. In the centre and the edges of the board we use a full-wood-core to ensure great durability and dynamic performance. For the less stressed areas like the tips we use a light-foam-construction to save unnecessary weight. Due to this construction the FlySplits offers great performance but also a great deal of comfort in choppy and gusty conditions.
One system
The FlySplit M in size 134cm x 41cm is made for those riders who love the high performance of the Radical. FlySplit M has a very low board weight, coming in at 2.65 kilograms. This makes traveling even more fun.
Summary
The FlySplits are great allrounders, which should not be left out on any travel, whether with plane, sports car or motorcycle. Due to the fantastic opportunity of splitting the boards in half, the FlySplits are a proper alternative to normal boards on the kitesurfing market. Thanks to a three year development phase, we can guarantee that the FlySplits perform like excellent kiteboards, but are still seperable. Thus there is no compromise on quality and performance.
